Round Hole 0.4-2.5mm Thickness Of Perforated Metal Sheet Panel For Decorative

Round Hole 0.4-2.5mm Thickness Aluminum veneer is divided into two kinds from the specification: the thickness of the aluminum veneer below 1.2mm is called aluminum gusset plate (also called aluminum square plate), the thickness of the aluminum veneer above 1.5mm is called aluminum veneer (also known as aluminum curtain wall).

The surface of aluminum curtain wall is generally treated with chromium and then treated with fluorocarbon spray. Fluorocarbon coatings and varnishes of polyvinylidene fluoride resin (KANAR500). Generally divided into two, three or four. Fluorocarbon coating has corrosion resistance and weather resistance, acid rain, salt fog and a variety of air pollutants, cold and heat resistance is very good, can resist strong ultraviolet radiation, can maintain a long-term colorfast, non-powder, long service life. The fluorocarbon coatings selected by PPG, DNT, AKZO, NIPPON and other companies have a wide range of colors. Customers can directly select or provide swatches samples according to the swatches provided.

The Round Hole 0.4-2.5mm Thickness Perforated Metal Sheet Pane product description

Specification: 1.5 aluminum alloy sheet galvanized sheet can also be customized according to the drawings

Material: aluminum alloy sheet, galvanized sheet

Thickness: 1.5 mm

Size: 550*2000, 660*2440

Pass the specification

The main specifications of punch net are square hole, square hole, diamond hole, round hole, round hole, hexagonal hole, cross hole, triangular hole, longwaist hole, mui hole, fish scale hole, pattern hole, eight character net, herringbone hole, five-pointed star hole, irregular hole, drum hole, shaped hole, shutter hole, etc.

Aluminum honeycomb panel, in the past only limited to the field of aviation, in recent years, with the development of the economy, its use gradually developed to the civil field, such as building decoration exterior wall, conference room, vehicle, ship decoration wallboard, compartment, etc. Aluminum honeycomb panel is made of all aluminum materials. The panel, bottom plate and honeycomb core are all made of high-strength aluminum alloy. It is a green environmental protection product and easy to be recycled and reused.

Recommended Usage:

1. Building lobby

2. Waiting room/bus terminal

3. Important public facilities

Stadiums and gymnasiums

Office of 5.

6. The conference room

7. The outer wall of the building

Perforated aluminum veneer performance:

1. Punching aluminum veneer is one of the series classification of aluminum veneer. The machining performance of punching aluminum veneer is very good.

The convenient characteristics facilitate the production personnel to process it into a variety of beautiful lines punched aluminum veneer, so punched aluminum veneer for designers to provide a very rich design creation.

2. Punching aluminum single plate adopts aluminum alloy plate as the base material. The surface coating treatment has the fluorine carbon spraying, the powder spraying, the polyester paint spraying. Fluorocarbon coating. From surface to interior, the multilayer coatings are: protective layer, fluorocarbon resin PVDF system, pretreatment layer, aluminum plate layer, pretreatment layer, and back coating.

3, punching aluminum veneer punching shape is applied more round or square, it should be noted that the larger the hole on the punching aluminum veneer, the thinner the quality of the aluminum veneer will become, as well as the resistance to pressure and tensile ability will be weaker.

Therefore, the hole size of punching aluminum veneer determines the application site of punching aluminum veneer, and the customer must customize the size and shape of punching aluminum veneer according to the actual requirements of the building itself.

    Guangzhou Panyu Jintong Wire Mesh Manufactory was established in 2009, located in Nancun Town, Panyu District, Guangzhou. It is close to Nansha Port and Huangpu Port, enjoying a superior geographical location and convenient transportation. After years of development and the support of friends, Jintong has become a professional mesh enterprise integrating research, development, manufacturing and sales, with advanced production equipment, testing equipment and professional technical personnel. Our main products are metal mesh series products such as perforated metal sheet, steel wire mesh, expanded metal mesh, chain link fence, PVC fence, security fence, barbed wire, steel grating, welded wire mesh woven wire mesh and so on. Special material and specifications can be customized according to customers' requirements.

    Pursuing quality and creating excellence are our struggle goals; Integrity, Pragmatism, and Development are our business philosophy; Customer-oriented, Serving the world is our entrepreneurial spirit; Win-win, Mutual Benefit is our cooperative thinking. Sincerely look forward to cooperating with you.