Customized size perforated manufacturer mdf panels for furniture
Perforated MDF
As well as flexible MDF we also stock a range of Perforated MDF
board in 1220 x 2440mm standard size, in 4mm, 6mm, 9mm, 12mm, and
15mm thicknesses.
Our perforated MDF boards are machine routed in a number of highly
attractive designs where air and light is required to pass
through the panels. It has a pre sanded finish and can be coated
with virtually any type of paint or varnish for superb and
visually appealing results.
Perforated MDF Applications
It is ideal for covering ugly radiators while allowing warm air to
circulate freely.
It is also ideally suited to the making of screens and panels and
can make an attractive decorative statement in any room or
fitted furnishing. Our Perforated MDF panels allow air to circulate
and the formation of beautiful patterns of light and shade
that when strategically placed near a light source, can totally
transform the atmosphere of any room.
Perforated MDF can also be used to make screens and dividers and
can add a decorative touch to furniture building. In fact this
material has so many potential applications in design there seems
to be almost no limit to the creative applications and projects
these perforated panels can offer, with a bit of imagination.
We recommend that MDF panels are used only for interior projects
and to observe safety precautions when cutting or sanding MDF due
to the fine dust this creates.
Product Paramenters
Material | HDF/MDF/ Hardboard |
| Size | 1000*2000 mm,1200*2400mm or customized |
| Thickness | 1-18mm |
| Hole Distance | >=3mm |
| Hole Diameter | 4mm~20mm |
| Color | White, Black, Browm, etc/ soild color/ wood grain color |
| Surface | Melamine paper/ painting/PVC/ UV /PU Paper |
| Grade | E0, E1, E2 |
| Delivery Time | 15 days |
| Usage | To accept pegs or hooks to support various items |
Acoustic MDF Board Specification
Structure Base Material, Finish & Back Finish
Basic Material Fireproof, Eco-friendly
Front Finish Melamine, Natural Wood Veneer, Paint, etc.
Back Finish Black acoustic fleece
Standard Size 600*1200mm, 600*600mm, 2440x128mm
Standard Thickness 15/ 18 / 12mm MDF acoustic panel
Standard Pattern 16-16, 32-32, 8-8 (higher cost)
Acoustic Principle Resonance Absorption
Eco-Friendly China and EU standard class E1
Fire Resistance China and EU standard class B
Function: MDF acoustic ceiling board, perforated MDF wall board
Applications
Pegboard Display can be overlaid with vinyl, timber veneer or a paint system. It is
used to make cupboard doors, cupboardend panels and other
applications where panels are required to be decorated on one side.
Substrate and pre-stressed bow options.
Many factors will contribute to the overall stress applied to the
non-laminated panel face and hence the resultant panel flatness.
Theseinclude the decorative surface applied and the amount of face
routing or modification to the non-laminated face. There are two
Single Sided MDF board substrates available and each has different
pre-stressed values to accommodate the various manufacturing
factors.
Therefore, Laminex strongly recommends that trial panels be
manufactured and subjected to the proposed environment before
full-scale processing commences. Due to high risk of visual defect
from minor surface distrubances the product used for high gloss
applications should be prepared suitably.
MDF Acoustic Wall Panel Installation Method
(1) Light steel keel system for perforated wood board
(2) Wood batten system
Pre-installation Requirements:
1. The installation site must be dry, and the minimum temperature
should not be less than 10 Degrees Celsius.
2. The maximum humidity change after perforated board installation
should be in the range of 40% -60%.
3. The installation site must meet the above specified humidity
standards at least 24 hours prior to installation.
4. Perforated MDF board must be placed in the installation site for
48 hours, so that the board can adapt to the indoor
environment.
5. If you use wood keel, the distance from wood keel surface to the
base is generally 50cm in accordance with the specific
requirements.
6. If there is a need for filler in the keel gap, make sure that it
does not affect the installation of perforated MDF board or
perforated ceiling tile.
